This is a cast bronze memorial plaque with an integral color tile and service badge.  It is mounted on a custom walnut plaque.  The overall dimensions of the bronze plaque is 16" by 19".  The walnut plaque is 2" larger all around.  Since the weight of the finished plaque is around 100 pounds, a custom gravity cleat was affixed to the back of the plaque.

Our artist created the image for the color tile from a old stapled through personnel photograph of the individual (see bottom of this page).  The service badge was provided by the agency and we welded it to the finished plaque.

This design is Copyright © by our company.

Original Photo	Photo After Our Artist Fixed It.
These images are used with the expess permission of the purchaser.

 

For your convenience, many of our memorial plaques are available for on line purchase. Click here to view those that are available at our on-line store. Each of these plaques are customize to your specific requests.

If you are installing this plaque in a cemetery, you should check with your cemetery association if they will allow you to install a memorial plaque that you purchase elsewhere. Many times a cemetery will charge a 'setting' fee or other fees for installing memorial plaques and cemetery markers that have not been purchased through them.

Every cemetery is different and each has their own sets of rules and regulations. It is your responsibility, NOT OURS, to confirm their acceptance of any plaque purchased from our company. That said, we have not as yet been advised by any purchaser that a cemetery would not allow them to install a plaque purchased from us.